KLN KABUTO LATHE CENTER with NUT
Used for lathes equipped with the rotating tailstock, etc.
The replacement head enables cost reduction.
- See page HEAD LIST for center head types.
- Type KLN comes with the center head A and then the center head ejecting drift DHN-1
(KLN-5 come with the center head 5A60° and DHN-2). - For No.5 only, use the hook spanner (commercially-available) for 70 to 75 (not hexagonal in shape).
DIMENSIONS TABLE
(UNIT mm)
| MODEL TYPE | M.T. | φD | φh | A | B | C | E | F | L | M | N | N1 | H | WEIGHT (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KLN-3 | No.3 | 24 | 16 | 36.1 | 11 | 87.5 | 6.5 | 22.4 | 134.6 | M26×P1.5 | 41 | 13 | 21 | 590 |
| KLN-4 | No.4 | 32 | 16 | 36.2 | 15 | 112.5 | 10 | 22.5 | 163.7 | M36×P1.5 | 55 | 22 | 27 | 1,230 |
| KLN-5 | No.5 | 44 | 26 | 61.2 | 15.5 | 141.5 | 10 | 38 | 218.2 | M50×P1.5 | 69 | 20 | 36 | 2,560 |
*Dimensions are subject to change for alteration without prior notice.
